TO OBTAIN THE LATEST VERSION OF YOUR SOFTWARE, PLEASE USE THE FS2CREW ‘PRODUCT MANAGER’ AVAILABLE ON THE ‘DOWNLOADS’ PAGE OF THIS WEBSITE.

THE PRODUCT MANAGER WILL INDICATE IF AN UPDATE IS AVAILABLE FOR YOUR PRODUCT, AND ALLOW YOU TO DOWNLOAD AND INSTALL THE UPDATE DIRECTLY.

 

VERSION 1.0.41
RELEASE DATE: 25 JUNE 2022

• NEW VOICE COMMAND: “SAY AGAIN / REPEAT LAST”

• PIN ICON COLORIZED TO VISUALLY INDICATE IF FS2CREW MAIN PANEL IS “PINNED” (FORCED TO FRONT OF WINDOW)

• CHINESE VPN ISSUE ADDRESSED

• COMMAND CENTER PRODUCT LIST UPDATED

 

VERSION 1.0.40
RELEASE DATE: 30 MAY 2022

• INTERNAL COMMUNICATION ISSUE WITH MSFS FIXED.

 

VERSION 1.0.38
RELEASE DATE: 28 APRIL 2022

• NEW OPTION ADDED TO THE SETTING PANEL THAT ALLOWS THE FS2CREW ‘COMMAND CENTER’ TO AUTO LOAD WHEN WINDOWS STARTS. 

THIS NEW OPTION WAS CREATED BECAUSE THE ‘EXE.XML’ FILE, WHICH MSFS USES TO CONTROL WHICH 3RD PARTY PROGRAMS AUTOSTART, IS VERY SUSCEPTIBLE TO FAILURE, ESPECIALLY GIVEN THE LARGE NUMBER OF OTHER 3RD PARTY DEVELOPERS NOW WRITING TO IT.

IF YOU EVER FIND THAT THE COMMAND CENTER DOES NOT AUTO LOAD WHEN MSFS LOADS, PLEASE FOLLOW THIS PROCEDURE:

1. LOAD MSFS.
2. MANUALLY START PUSHBACK EXPRESS EITHER VIA THE ASSOCIATED DESKTOP ICON OR VIA THE ASSOCIATED EXE FILE LOCATED IN PROGRAM FILES X86 – FS2CREW CRJ FOR MSFS IN CASE YOU DELETED THE DESKTOP ICON.
3. GO TO THE SETTINGS PANEL.
4. SELECT ‘LAUNCH FS2CREW COMMAND CENTER AT WINDOWS STARTUP’

5. RESTART WINDOWS.
6. THE COMMAND CENTER SHOULD NOW AUTO START WHEN WINDOWS LOADS AND BE VISIBLE IN THE SYSTEM TRAY.
7. THE COMMAND CENTER MUST BE RUNNING FOR FS2CREW TO WORK PROPERLY.
8. NOTE: IF USING THIS METHOD, THE COMMAND CENTER WILL NOT AUTO SHUTDOWN WHEN MSFS IS CLOSED.  IF YOU WISH TO SHUTDOWN THE COMMAND CENTER, MANUALLY SHUTDOWN THE COMMAND CENTER VIA THE SYSTEM TRAY.

VERSION 1.0.36
RELEASE DATE: 23 APRIL 2022

• VOICE COMMAND: “SET LANDING ELEVATION TO XXXX” WILL NOW ALSO WORK ON THE GROUND, NOT JUST IN THE AIR.

 

VERSION 1.0.35
RELEASE DATE: 16 APRIL 2022

• ISSUE WITH DOOR OPERATION DURING PREFLIGHT EVENTS FIXED.

 

VERSION 1.0.32
RELEASE DATE: 9 APRIL 2022

• ISSUE WITH AFTER LANDING CHECK RESOLVED.

 

VERSION 1.0.30
RELEASE DATE: 2 APRIL 2022

• ADDED NEW VOICE COMMAND: “SET LANDING ELEVATION TO XXXX”.

• ADDED CABIN ANNOUNCEMENTS.

• FIXED: 90 KNOTS CALL ON LANDING.

• FIXED: ISSUE WITH TRIM SETTING READBACK.

• FIXED: ISSUE WITH DOORS NOT CLOSING PRIOR TO PUSHBACK.

• IMPROVED: ENGINE START COMPLETE CALLOUT TRIGGER.

• MODIFIED: USING “SELECT” AS PART OF A VOICE COMMAND IS NOW OPTIONAL.

 

VERSION 1.0.9
RELEASE DATE: 23 MARCH 2022

• FIXED: APU NOT STARTING AFTER LANDING.

• FIXED: AUTOPILOT COMMAND IF AP ALREADY DETECTED ON (BUTTON CONTROL).

• FIXED: LAMP TEST TRIGGERING THE FLIGHT ATTENDANT (PURSER DIALOG).

• FIXED: SUPPLEMENTARY VOICE COMMANDS NOT WORKING:

  1.      SPEED MODE
  2.      NAV MODE SPEED MODE
  3.      HEADING MODE
  4.      HEADING MODE NAV MODE

• FIXED: RANDOM APPLICATION CRASHES DUE TO LOG FILE BEING USED BY ANOTHER PROCESS.

• MOVED: “FLIGHT NUMBER” FIELD NOW PLACED BELOW THE “AIRLINE CALLSIGN” IN THE SETTINGS WINDOW.

• FIXED: FO STILL SETS FLAPS EVEN IF THE OPTION IS DISABLED ON THE SETTINGS WINDOW DURING THE PRE TAXI FLOW.

• FIXED: “FLAPS 8” ACTION WAS SHOWN DURING CLIMB EVEN IF THE TAKEOFF FLAPS WERE ALREADY AT FLAPS 8.

• REMOVED: FLYBYWIRE A320 SPECIFIC OPTIONS AND TOOLTIPS FROM THE SETTINGS WINDOW.

 

VERSION 1.0.0
RELEASE DATE: 18 MARCH 2022

• PUBLIC RELEASE